This Battery Hold Down System eliminates the need for tape. It uses 2 post stand-offs with some keyed carbon fiber tabs. The way it is designed, it allows for the chassis to flex more evenly from side to side as the battery is not taped down onto the chassis. As a bonus, it makes battery changes much easier.
This battery system is compatible with the RSD6 Chassis.
Installation Guide: Please take note that every battery is a little bit different, so they need a little bit different spacing. The goal is to have about 0.5mm of space between the battery and the battery tab in order to allow the chassis to flex freely.
Bonus Tip: Use O-rings to take up the slack in the front/back/side-to-side of the battery.