 |
| |
|
|
|
05/06/10
1.Exciting times are up ahead, our MR-03
front end is finally in prototyping stages, so
this should mean that we should have some working
prototypes by mid to late this month. Believe
me when I say that these parts will change the
balance of the Mini-Z world even more!
With that, there are a whole bunch of
new items that will be showing up on the following
months that will be awesome, they are no longer
small projects, but rather quite the opposite,
so stay very attentive over the next couple of
months at Reflex!
2. We have a couple of minor small items
that are new in our product catalog, amongst them,
our all new High Grade Spur Gear Bearings in 2.0mm
and 2.5mm
that are compatible with PN, Atomic and 3Racing
gears and will also be an option on our upcoming
V2 Spurs, which should arrive by the end of the
month. These bearings are made with the same objective
in mind as all our other bearings, so they are
of the highest quality and much less expensive
than the other offerings out there. We also now
sell replacement silicone
o rings for your 2WD ball diff and 2.4GHz
antenna wire which is more flexible and better
insulated than the one that comes on all Kyosho
boards.
|
|
| |
|
|
1.NEW ADJUSTABLE
T BAR MOUNTS ARE IN!!! For those of you that
Pre-ordered them, they should all be on their
way to you on Wednesday. They are available in
Blue, Silver, Titanium, RED and Gold. The Spring
Cups will be a couple of more days, they will
only be available in our signature Reflex Titanium
though...
2.RE-STOCK OF EXTRA
LONG KING PINS AND DELRIN
BALLS!!! Our Number 1 Selling Products are
back in stock! Hurry and get yours before they
sell out again. This is the upgrade most racers
recommend as "A MUST HAVE" Get yours
and find out why!!!
3.Now available as well is the Carbon
Edition Mini-Z F1. This is a limited production
car of which only 1000 Units were made. If anything,
get one for the collector's value of it. |
|
|
|
CTP MOTORS
1.Well, we have been contemplating this
for a long time, so as a request from many people,
Reflex is taking a dip into the 130 size Motor
World! For starters, we will be offering a couple
of motor building services, them being Full
Motor Blue Printing and Motor
Break in Services. Drop down menus have been
added to each available menu so that you can get
it done before we ship them to you or you can
also purchase the service to bring your old motors
back to life.
2.We are also starting a New Product
Line called "CT
Performance Motors". CTP Motors will
be our very own our electric-motor related product
line. Our first 2 products will be our custom
built High
Performance Machine Wound Modified Motors
and our Ultra
Performance Custom Hand Wound Motors. They
are REALLY, REALLY, FAST!!!
In the near future, we have several other
projects up our sleeve in the motor department,
so stay tuned! |
|
|
|
Reflex
Introduces New Fluid Line -
11/4/09
After over a year of research, our all-new fluid
and dampening line is finally available. This
all new line of different types of grease will
help you fine tune your car to any surface and
racing condition. Don't underestimate the value
of dampening on your Mini-Z. Click on the image
or the link above to see all the products. |
|
|
|
NEW
TEAM SHIRTS ARE NOW FOR SALE!!!
- 10/26/09
Deck yourself out in our all-new Team Reflex
Racing 2010 shirts. Click on the link above or
the picture to get to the products.
Also, we were just informed that the WTF2 should
be arriving by the end of this week!!! |
|
|
|
NEW DRIVE TRAIN PARTS!!!
We are now offering our 64 pitch delrin spurs
in 51T
and 53T.
They are both in stock now! Also we have introduced
a new high quality ceramic
thrust bearing to replace on your 2WD differentials.
This new thrust bearing increases load handling
capabilities of your diff enabling smoother and
more consistent operation.
|
|
|
|
Reflex
Racing "Purple Stuff" is released!
- 10/06/09
The all-new Reflex "Purple Stuff" is
a very versatile bearing and bushing lube that
can be used to increase the efficiency of your
Mini-Z. It is ideal for stock motor racing and
freshly cleaned bearings. |
|
|
|
WTF2
Pre-Orders are up! - 10/04/09
They arrive at the end of the Month, so don't
hesitate in reserving your today. The new WTF2
is a better performing, revised version of our
World-Championship winning Wide Track Front. They
will be available in Blue, Gray, Silver and Gold.
Click on the pic or the link above. |
|
| |
Reflex
64 Pitch Machined Delrin MR-02 Spur Gears Arrive!!!
7/24/09
We teased a while back about these, well they
are here. At the time we are only offering a 53
tooth spur gear, as it is the most widely used.
Being machined from delrin makes them truer, harder
and lighter than any other spur in the market,
as we now this translates into higher drivetrain
efficiency, which yields more speed! Get yours
before they sell out!
|
|
|
| |
More QteQ Stuff!!! - 07/22/09
You asked for them, now we have them in stock.
The QteQ
Left Rear Wheel Nuts for your 2WD vehicles
are now available. We also received a bunch of
stuff that was out of stock in this latest order
including the very popular Lexan
MM H-Plates. |
|
|
| |
Full
Line of QteQ Parts!!!
We have added a full catalog of QteQ Parts. Click
on the image to the left or the link above to
see them all!!! |
|
|
|
RX1131
Mini-Z AWD Ultra Light Weight Aluminum Main Shaft.
All new from Reflex is our Ultra Light Weight
Aluminum Main Shaft. This shaft is light weight
and very strong, not to mention very economic.
This shaft does not come with the knurls as the
Reflex Racing Titanium shaft, so we do recommend
to CA the plastic front gear on to it, but on
the plus side, it is 1/2 of the cost and even
lighter in weight than the Ti shaft.
|
|
|
|
RX1124FP
Mini-Z AWD 96mm Full Conversion Set
Now available from Reflex is the 96mm Full Conversion
set for the Mini-Z AWD. As with the MR-02, the
AWD also benefits of improved balance in this
configuration. It has more stability than a 94mm
car and much more steering than a 98 or 94mm chassis. |
|
|
|
RX1124S
Mini-Z AWD 96mm Plates and Spur Gear Set
Now available from Reflex is the 96mm Plate and
Spur Gear Set for the Mini-Z AWD. This set was
designed to be used with the 3Racing Carbon Fiber
Gear Cases. As with the MR-02, the AWD also benefits
of improved balance in this configuration. It
has more stability than a 94mm car and much more
steering than a 98 or 94mm chassis. |
|
|
|
RX1124
Mini-Z AWD 96mm Plate Set
This is the 96mm Extension set for the Mini-Z
AWD. As with the MR-02, the AWD also benefits
of improved balance in this configuration. It
has more stability than a 94mm car and much more
steering than a 98 or 94mm chassis. |
|
|
|
QteQ
Parts Now Available at Reflex!!!
The first batch of QteQ parts is now available
on our online store. We are so impressed with
the quality and workmanship of the QteQ line of
products that we have decided to carry a full
cataloge soon! In the meantime click here
to see what parts we already have in stock, or
simply do a search for QteQ on our search
bar. |
|
|
|
EMU
Bars Now In Stock!!!
Designed by our buddy Eugene Uyterlinde (aka
"EMU") the EMU bars help convert your
MR015 front end to MR02 width. Many people have
recently found out how quick the MR015's can be
on certain circuits when built like proper race
cars. Part of it is increasing the front width
in order to increase stability and cornering prowess,
and this is what these
bars do. Try them out!!! |
|
|
|
Reflex
Racing Delrin AWD Outdrives are here!!!
Now available through Reflex Racing is out Delrin
outdrives for the Kyosho Ball differential, for
more info click here.
|
|
|
