***GEAR DIFF NOT INCLUDED*** Start Shipping 12/12/24
The Gen2
Worlds Edition kits are here! This kit is basically a replica of the
chassis that the team ran in Paris at the 2024 PNWC. It has all the
refinements of the Champions edition, plus the new 24mm battery
compatible chassis included.
Much like the
Champions edition, this is not a revolution, but rather an evolution of
quality and attention to details that we have meticulously worked on
getting ironed out over the last year since the release of the Gen 2
cars. Better tolerances, higher quality finishes, hard coated
everything and extra attention to details to make the RX28 experience
just a little bit better than before.
The Champions Edition cars build on the great Gen 2 platforms and include all the refinements we have been working so hard at getting to you.
In and effort to more easily identify it, we are now going to call the double a-arm RX28 the "RX28D" The new changes in the D car are:
-RX28A-39 24mm Battery Compatible Steel Chassis
-Revised motor mount with locating spline for tougher assembly and less flex,
-Updated Axle Carrier to include location for attaching rear mass damper.
-Reflex Racing 30 Degree Rear Radial 11mm Tires and 40 degree front low profile slicks.
-New Aluminum Main Damper with locking adjustment collar.
-Updated Front Shock Adjustment collars with laser engraved pre-load dial mark
-New Version 4 Ball Differential with Plastic Spur Gear Covers
-Updated hard-coated 7075 T6 aluminum pivots and damper pistons
PLUS (all the items that had been Gen 2 running changes):
-New Damper Tubes
-New Ball Cups and Turnbuckles
-30g Stainless Steel Chassis with Hard Coating for more durability, quality and performance vs brass
-All New Ultra Low CG Motor Mount for increased corner speed, lighter weight and more precise ride height adjustment. It allows virtually any motor in the industry to be a drop in to the mounting position. Allows gear adjustment from 9T-17T Pinions.
-Revised hardware throughout.
-Reflex Racing Speed Wheels Included
Dimensions:
-98mm Wheelbase
-145g-170g weight RTR Depending on body and Electronics
-69mm to 78mm Rear Track Width
-72mm to 75mm Front Track Width
Need to Complete:
-Body and either front clip or front bumper
-Wheels and Tires
-Electronics: Motor, Lipo Battery, ESC, Receiver and Servo (Please note, the provided servo horn is designed to work with the Reflex Racing RRE007 Servo 20T Spline. Additionally, the AGFC A06CLS V1, the GL, the PN Anima and the Atomic Servo (it is a little bit of a tight fit but same sized spline) will fit as well.
****ELECTRONICS ARE NOT INCLUDED!!!
NOTE: When Mounting Hard Plastic bodies, you will need to mount the ridges forward on the side clips.
Shopping CartItems0
