The RX28D Gen 3 is here to redefine what a 1/28th-scale RC car can do. Designed for drivers who demand speed, agility, and pinpoint control, this third-generation model packs a host of upgrades that make every run feel like a victory lap.
The revamped front end features 1mm longer arms for improved stability, paired with a sway bar system that lets you carve corners with surgical precision. Fine-tune your setup with adjustable caster (3 screws), an integrated shock tower with shim adjustment, and adjustable upper arm hinge pin height for tailored camber gain and roll center. The RX28D also comes with all new lighter, but durable plastic knuckles and they are combined with also new, low-profile big bore shocks and springs which ensure smooth, responsive handling, giving you the edge on any surface.
The rear end sees many improvements as well. A new, much lower CG Rear End sees an all new motor mount that lowers the motor by 0.8mm, a new damper mount secured by 3 screws for easier service to the rear suspension, a tweak brace dropped 1.25mm, shorter side springs, thinner spring perches, side dampers lowered by 3mm (secured by screws on the motor mount), and smaller diameter center shock spring, collar and perch, all which allow for higher corner speeds and quicker direction changes. Finally, a pinned Rear Motor Pod Plate increases precision and durability on the car.
This third generation car is also much easier to work on as well. The car now uses mostly ball studs all around, which standardized hardware and makes it much easier to work with.
The RX28D Gen 3 comes ready to roll with one set of wheels and tires, perfect for getting you on the track fast.
Dimensions:-98mm Wheelbase
-145g-170g weight RTR Depending on body and Electronics
-69mm to 78mm Rear Track Width
-72mm to 75mm Front Track Width
Need to Complete:
-Body and mounting hardware
-Electronics:
Motor, Lipo Battery, ESC, Receiver and Servo (Please note, the provided
servo horn is designed to work with the Reflex Racing RRE007 Servo 20T
Spline. Additionally, the AGFC A06CLS V1, the GL, the PN Anima and the
Atomic Servo (it is a little bit of a tight fit but same sized spline)
will fit as well.
****ELECTRONICS ARE NOT INCLUDED!!!
Shopping CartItems0
